39,90 €
BM129 No-Disassembly DPF Cleaning Foam – Unclogs, cleans, and extends the life of the particulate filter while reducing emissions. Made in France.
The BM129 No-Disassembly DPF Cleaner is an innovative cleaning foam that unclogs and restores the efficiency of clogged particulate filters (DPFs) without having to disassemble them. Designed and manufactured in France, it quickly removes soot, ash, and other deposits, restores the DPF's capacity, and extends its lifespan. This treatment also helps reduce pollutant emissions and prevent costly breakdowns related to DPF clogging. Ideal for efficient and safe maintenance, it is suitable for light vehicles and, in double doses, for heavy goods vehicles. Its action is certified and approved.
✅ Unclogs and extends the life of the DPF
✅ Prevents fouling and reduces emissions
✅ Quick and easy to use without disassembly
✅ Made in France
The DPF temperature must be between 20°C and 40°C.
Read the DPF values (clogging rate, differential pressure) with a diagnostic tool.
Remove the temperature probe or pressure sensor upstream of the DPF.
Insert the extension provided and spray the entire can into the DPF (allow 2 cans for heavy goods vehicles).
Reassemble the probe or sensor and leave the product to act for at least 45 minutes with the engine off.
Start the engine at idle for 1 to 2 minutes to push the product towards the rear of the DPF.
Leave to act with the engine off for at least 3 hours (the longer the action time, the more effective the treatment).
Perform a road test of at least 30 minutes at a minimum of 3000 rpm, or initiate a forced regeneration.
Clear any faults using a diagnostic tool and check the DPF values to confirm effectiveness.
Reference: BM129
| Brand | |
|---|---|
| Product Name | |
| Product Type | |
| uses | |
| Frequency of use | |
| Reference |
